"PendingAdjustments..." can be done AFTER a Closing Point date.
The "Pending Adjustments For Which Closing Point" window will only be shown, if all following 3 conditions are met:
1) farmerswife takes the _next_ Closing Point from the "current system date" (this always happens).
2) You select a day in Long From > View Port, and farmerswife can take the _next_ Closing Point from that "Selected" day.
3) The _next_ Closing Point from the _selected day_ must be different to the Closing Point from the _current_ system date.
Only then, if all 3 above conditions are met, then the "Pending Adjustments For Which Closing Point" pop-up window is shown, for you to select which Closing Point farmerswife should use.
Examples:
a) Current system date: 31. March 2016
Next Closing Point date: 31. March 2016
_NO_ day in Long From > View Port selected.
HAPPENS:
No "Pending Adjustments... SELECT Closing Point" window is shown, because:
1) = Yes
2) = No
b) Current system date: 23. March 2016
Next Closing Point date: 31. March 2016
28th of March is selected in Long From > View Port.
Next Closing Point date: 31. March 2016
HAPPENS:
No "Pending Adjustments... SELECT Closing Point" pop-up window is shown, because:
1) = Yes
2) = Yes
3) = No
c) Current system date: 23. March 2016
Next Closing Point date: 31. March 2016
1st of April is selected in Long From > View Port.
Next Closing Point date: 31. May 2016
HAPPENS: The "Pending Adjustments... SELECT Closing Point" window IS shown, because:
1) = Yes
2) = Yes
3) = Yes
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article